Access Control

Keyless Entry & Video Intercom Upgrade

Modern Hikvision keyless entry and video intercom upgrade with remote visitor answering and a custom powder-coated mounting solution.

Gold Coast, QLD

SOUTHCOMM Project

Services completed

  • Hikvision Villa Door Station installation
  • Keypad & keyless entry
  • Video intercom with remote answering
  • Custom powder-coated mounting plate
  • Programming & commissioning

Overview

The customer wanted to upgrade the existing entry system but did not want a traditional indoor answering station.

SOUTHCOMM installed a Hikvision Villa Door Station that combines video intercom, keypad access and keyless entry in a modern single-unit solution, so visitors can call from the entrance and the customer can answer whether they are at home or away from the property.

Challenge

The existing Fermvision intercom occupied a significantly larger footprint than the new Hikvision unit. Simply removing it and mounting the new station would have left the original wall opening, mounting marks and fixing points visible.

Because the original intercom occupied a considerably larger opening, SOUTHCOMM fabricated a custom stainless steel backing plate to completely conceal the existing footprint. The plate was professionally prepared and powder coated to provide a clean, durable finish before the new Hikvision Villa Door Station was installed.

  • Measured to completely cover the footprint of the existing intercom
  • Cut and fabricated to suit the new Hikvision Villa Door Station
  • Drilled and prepared before finishing
  • Mechanically prepared to provide a suitable surface for coating
  • Cleaned and degreased
  • Professionally powder coated
  • Oven cured to produce a hard, durable finish
  • Installed as the new mounting surface for the Hikvision equipment

Solution

The existing Fermvision equipment was removed and a Hikvision Villa Door Station with integrated keypad and keyless entry installed in its place. Rather than fitting an unnecessary indoor answering station, the system was configured so the customer can receive and answer visitor calls remotely.

The custom powder-coated stainless steel cover plate conceals the footprint of the previous intercom and creates a clean mounting surface for the replacement system. The complete system was then programmed, configured and tested.

Result

  • Keyless entry
  • Integrated keypad access
  • Video intercom
  • Remote visitor answering
  • No dedicated indoor answering station required
  • Modern Hikvision entry station
  • Clean replacement of the oversized existing intercom
  • Custom powder-coated stainless steel mounting plate
  • Professional programming and commissioning

Before

After

Need to Upgrade Your Access Control or Intercom?

SOUTHCOMM installs and upgrades access control, keyless entry and video intercom systems across the Gold Coast and South East Queensland.