Security Systems Gold Coast
SOUTHCOMM installs electronic security systems across the Gold Coast and South East Queensland, including alarm panels, intrusion detection, door monitoring and connected security equipment professionally integrated with CCTV and access control.
- Gold Coast based
- Security Adviser
- Security Equipment Installer
- Registered Cabler
- $20M Public Liability
- 14+ years hands-on experience
Commercial standard, owner-operated.
- Gold Coast based and owner-operated — Brad does the work
- 14+ years hands-on industry experience
- Registered Cabler — security cabling done to standard
- Security Adviser
- Security Equipment Installer
- $20M Public Liability insurance
- Security, CCTV, access control and cabling from one contractor
- Systems documented and labelled at handover
What a typical scope covers.
Site security assessment
Walkthrough of entries, perimeter, after-hours risk, existing equipment and what actually needs protecting before anything is quoted.
Intrusion detection
Motion detectors, reed switches, glass-break and perimeter devices positioned to suit site risks, coverage requirements and the intended security outcome.
Alarm systems
Commercial alarm panels, keypads, sirens, strobes and app or monitoring-ready communicators installed and programmed.
Door monitoring
Door contacts, forced-door and door-held-open monitoring on entries, fire exits, storerooms and comms rooms.
Security cabling
Structured cabling supporting security systems — detector, panel, reader and camera runs installed, terminated, tested and labelled.
Commissioning & handover
Zones tested, users and codes configured, device schedule and documentation provided, and staff walked through operation.
The jobs this work usually covers.
- New commercial alarm and intrusion detection installs
- Security system upgrades and panel replacements
- Adding zones, detectors or keypads to an existing system
- Door monitoring on fire exits, storerooms and comms rooms
- Integrating alarms with CCTV and access control
- Troubleshooting nuisance alarms and faulty detectors
- Taking over and documenting systems left by another contractor
- Cabling and network for security equipment during fit-outs
Where this work goes in around the Gold Coast.
Offices & tenancies
After-hours intrusion detection, reception and server room monitoring, and arming that suits shared-building access.
Warehouses & industrial
Perimeter and roller-door coverage across large open areas, yards and dock entries where a standard package falls short.
Retail & hospitality
Back-of-house, storeroom and cash-handling protection with alarm events linked to camera footage.
Medical & professional
Restricted-area monitoring for records, drug safes and consult rooms, integrated with door access.
Strata & body corporate
Common-area, plant room and comms room monitoring across multi-tenancy buildings.
Residential & acreage
Larger homes and properties wanting commercial-grade equipment, proper cabling and coverage that actually works.
Hardware and standards used on this work.
- Commercial alarm panels
- PIR and dual-tech motion detectors
- Reed and door contact monitoring
- Glass-break and perimeter detection
- Sirens, strobes and duress devices
- IP-connected and app-controlled panels
- Alarm to CCTV event integration
- Access control integration
- Hardwired alarm & device cabling
- Structured cabling for IP-connected security equipment
Gold Coast based, across South East Queensland.
SOUTHCOMM is based on the Gold Coast and works the length of the coast — from Coomera and Helensvale in the north through Southport, Surfers Paradise, Bundall and Broadbeach, down to Robina, Burleigh Heads, Palm Beach and Currumbin. Work outside the Gold Coast across South East Queensland, including Brisbane, and into the Northern Rivers is quoted on request.
- Southport
- Surfers Paradise
- Broadbeach
- Mermaid Waters
- Bundall
- Robina
- Varsity Lakes
- Burleigh Heads
- Burleigh Waters
- Miami
- Palm Beach
- Currumbin
- Tugun
- Nerang
- Helensvale
- Coomera
Often installed alongside this.
CCTV
IP camera systems, NVR storage and remote viewing — linked to alarm events for full visibility.
CCTVAccess Control
Readers, door controllers, intercoms and credentials integrated with your security system.
Access ControlData Cabling
The structured cabling behind the panels, detectors, readers and cameras — tested and labelled.
Data CablingWi-Fi & Networking
Switching, VLANs and wireless coverage for network-connected security equipment.
Wi-Fi & NetworkingCommon questions.
What does a commercial security system include?+
Most commercial systems combine an alarm panel with intrusion detection, door and perimeter monitoring, keypads or app-based arming, and integration with CCTV and access control. The right mix depends on the site — we scope it on a walkthrough rather than selling a fixed package.
Can you upgrade an existing security system instead of replacing it?+
Often, yes. Panels, detectors, keypads and communicators can frequently be upgraded or extended while keeping serviceable existing cabling and devices. Where the existing gear is obsolete or unsupported we'll tell you plainly and quote the replacement.
Do you integrate security with CCTV and access control?+
Yes. Alarm events can be linked to camera footage and door controllers so an intrusion event, a forced door or an after-hours entry is captured and reviewable from one place.
Do you take on troubleshooting and maintenance work?+
Yes. Faulty detectors, nuisance alarms, dead zones, unlabelled cabling and systems left behind by a previous contractor are common jobs. SOUTHCOMM fault-finds, documents what's there and repair or replace as needed.
Ready to get security systems sorted?
Get a clear, itemised quote from a Gold Coast commercial communications contractor you can actually reach.